. . . . rf saw filter part number package application last modified 802-rf467.6m-a 3.0 x 3.0 smd cdma450 jan. 01, 2007 type : cdma450, rf-rx saw filter part number : 802-rf467.6m-a operating conditions / el ectrical characteristics parameters condition minimum typical maximum units center frequency (fo) - - 467.6 - mhz maximum insertion loss 465.2~ 470.0mhz - 2.8 4.5 db stop band attenuation: 0.3~ 455.2 mhz 40 50 - db 455.2~ 460.0 mhz 35 48 - 490.0~ 700.0mhz 40 50 - 700.0~ 1200.0 mhz 30 43 - 1200.0~ 2000.0 mhz 25 37 - source impedence (single ended)* - - 50 - ohm load impendance (single ended)* - - 50 - ohm vswr 465.2~ 470.0mhz - 1.5 2.0 - maximum input power - - - 27 dbm operating temperature - -30 - +80 oc * no matching network package outline (mm) pin layout a ground b in c ground d ground e out f ground test fixture pa g e 1 of 3 oscilent cor p oration rf saw filter | 802-rf467.6m-a
source/ load impedance = 50 ohms frequency response vswr smith chart pa g e 2 of 3 oscilent cor p oration rf saw filter | 802-rf467.6m-a
crystal oscillators | quartz crystal | tcxo | vcxo | if saw filter | rf saw filter | ceramic resonator crystal filter | ceramic filter | saw filter / saw devices | site map part no.: 802-rf467.6m-a pa g e 3 of 3 oscilent cor p oration rf saw filter | 802-rf467.6m-a
|